8031F / Kyoritsu - Japan
- Operating voltage: 110 - 600V AC
- Fuse: 0.5A/600V (F)
- Continuous duration: >500V: Within 5 Minutes
- Frequency response: 50Hz/60Hz
- Applicable standard: IEC 61010-1 CAT III 600V Pollution Degree 2
- Withstand voltage: 5550V AC For 1 minute
- Dimensions: 106(L) × 75(W) × 40(D)mm
- Weight: 350g
- Cord: 1.5m

Yếm da / Việt Nam
- Chất liệu: da động vật (da nối)
- Kích thước: 101mm x 57mm

AP-02 / Sunny (Pakistan)
- Seamless leather apron.
- Use to prevent splashing molten metal dust when welding, prevent mechanical impact, and prevent heat
- EN standards.

Yếm da / Việt Nam*- Chấ liệu: da động vật (da nối)- Kích thước: 101mm x 57mmTình trạng hàng: có sẵn(Có thể làm theo yêu cầu)

UCD03HA / Vicadi (Vietnam)
- Material: made from natural rubber, red pink color
- Voltage used: 3kV
- Test voltage: 5KV, test time: 1 minute, detection current: <= 9 mA
- Standards apply TCVN 5586 -1991
- There is a factory test card and a typical test card

U692/IEC35 - Vicadi - Vietnam*
- Material: made from natural rubber, red pink color
- Test voltage: 35KV, test time: 1 minute, detection current: <= 9 mA
- Standards apply TCVN 5586 -1991
- There is a factory test card and a typical test card
- Size 41, 42 IEC

U692/IEC30 / Vicadi (Vietnam)*
- Material: made from natural rubber, red pink color
- Test voltage: 30KV, test time: 1 minute, detection current: <= 9 mA
- Standards apply TCVN 5586 -1991
- There is a factory test card and a typical test card
- Size 41, 42 IEC

U692/CA / Vicadi (Vietnam)*
- Material: made from natural rubber, red pink color
- Test voltage: 22KV, test time: 1 minute, detection current: <= 9 mA
- Standards apply TCVN 5586 -1991
- There is a factory test card and a typical test card

DBS4 / Novax - Malaysia
- Features: Impact resistance, electrical insulation, chemical resistance, heat resistance, good abrasion resistance, anti-slip
- PE lining to enhance durability.
- Test voltage 20,000V
- Outsole resists electrical surges up to 18kV
- Standards: EN ISO 20345: 2011, EN 50321: 1999, CSA Z195-14 / ASTM F 2413-11, ASTM F1117-03

YS111-09 / Yotsugi - Japan
- Test voltage 20KV
- Working voltage: 7KV (AC)
- Color: brown

YS112 / Yotsugi - Japan
- Material: insulating rubber
- Usable voltage 26,500V AC, 39,750V DC
- Test voltage 30,000V AC
- Meets EN, CE, JIS (Japan) and ISO 9001 standards

448 / Anbaco - Vietnam
- Includes 4 alloy ground clamps
- The clamp head uses a wire clamp with a contact area of ​​50 ~ 300mm², the nose side can be made into a V shape up to 120⁰
- Ground wire made from 16mm² / 25mm² copper wire covered with 1mm PVC
- Set includes 1 piece of wire 1.5m long and 3 pieces 0.4m long connected by an insulated clamp (can be lengthened upon request)
- Used for grounding before performing work on 3-phase low voltage lines, Aptomat output at nuts and cables.
- Industrial design patent No. 21256 issued by the National Intellectual Property Office.

TD - 3351 / Anbaco
- Clamp head made of aluminum alloy
- The hot line clamp has a good spring and is tightened with a threaded ring. The contact surface between the clamp and the wire is large, good and even.
- The clamp head can clamp wires with a cross section of up to 240mm².
- There are 4 clamps for 01 set of ground wires.
- Grounding wire: Multi-strand soft copper wire with clear PVC coating; Uncoated wire cross section is 16mm²/25mm², PVC coating thickness is 1mm.
- There are 4 pieces of wire, each 2m long (or longer as required).
- At each end of the wire attached to the clamp head and the middle point connecting the wire segments, there must be a pressed coss. - At the pressed coss positions, there must be a flexible rubber cover on the outside to prevent the wire from fraying or breaking due to use. long time.
- Used to ground the medium voltage grid with voltage up to 35kV before performing work

GIM 120 / BOSCH
- Length: 120 cm
- Measuring range: 0-360 degrees (4x90 degrees)
- Electronic measurement accuracy 0°/90°: ± 0.05°
- Accurate electronic measurement at 1 – 89°: ± 0.2°
- Measurement accuracy, glass tube foam: ± 0.057° = ± 1 mm/m
- Approximate weight: 1.3 kg
- Measurement units: °, %, mm/m
- Operating time: 200 hours
- Measure tilt accurately in degrees, percent or millimeters/meter
- Directional arrows and audio signals at 0° and 90° make adjustments easy
- The measured value can automatically rotate on the screen when operating in an area above the head

TCD3KV-0.65x1 / Vicadi - Vietnam*
- Material: 100% insulating natural rubber
- Color: Red brown
- Dimensions: 0.65m x 1m x 5mm thick
- Voltage used: 3,000V AC
- Test voltage: 20,000V AC / 1 minute
- Leakage current ≤ 20 mA
- Each product comes with a factory inspection card

TCD35KV / Vicadi - Vietnam
- Material: 100% natural insulating rubber
- Color: Reddish brown
- Size: 1x0.65m; 1x1m; 1x2m; 1x2.5m; 1x4m; 1x5m
- Thickness: 8mm
- Operating voltage: 35,000V AC
- Testing voltage: 35,000V AC / 1 minute
- Leakage current ≤ 20 mA
- Each product comes with a factory inspection certificate

TCD22KV / Vicadi - Vietnam
- Material: 100% natural rubber insulation
- Color: Reddish brown
- Size: 1x0.65m; 1x1m; 1x2m
- Thickness: 7mm
- Operating voltage: 22,000V AC
- Test voltage: 22,000V AC / 1 minute
- Leakage current ≤ 20 mA
- Each product comes with a factory inspection certificate
(Other sizes available 1m x required length)

TCD10KV / Vicadi - Vietnam*
- Material: 100% natural insulating rubber
- Color: Reddish brown
- Thickness: 6mm
- Dimensions: 1x0.65m; 1x1m; 1x2m; 1x5m; 1x10m
- Operating voltage: 10,000V AC
- Testing voltage: 20,000V AC / 1 minute
- Leakage current ≤ 20 mA
- Each product comes with a factory inspection certificate

Class 4 insulating carpet / Sofamel - Spain
- Material: natural rubber
- Sock breaking voltage: 50,000V
- Size: 1.0x1.0 m
- Thickness: 4.5 mm
- Weight: ~7.8kg
- Standard: IEC 60243-1