YS101 / Yotsugi - Japan
- Material: insulating rubber
- Usable voltage 26,500V AC, 39,750V DC
- Test voltage 30,000V AC
- Length: 410mm, thickness: 2.9mm
- Meets EN, CE, JIS (Japan), ISO 9001 standards

YS101 / Yotsugi - Japan
- Material: insulating rubber
- Operating voltage 17,000V AC,
- Test voltage 20,000V AC / 3 minutes
- Meets EN, CE, JIS (Japan), ISO 9001 standards

YS102 / Yotsugi - Japan
- Material: insulating rubber
- Usage voltage 1,000V AC; 1,500V DC
- Test voltage 5,000V AC
- Has high electrical durability and has been tropicalized, very durable in use
- Length: 280mm, thickness: 1.3mm
- Meets EN, CE, JIS (Japan) standards and ISO 9001 quality management system

Unix5100 + filter 531 (A1B1E1K1) / Sorbent (Rusia)*
- Material: Silicon
- Filter cartridge 531 with the ability to filter inhaled air from organic, inorganic and acidic gases and vapors, ammonia and its organic derivatives. The filter is used when the volumetric oxygen content in the air is at least 17%, with the content of gases and vapor harmful substances at ambient temperatures from - 40 to + 40 ° C.
- The product meets and exceeds  European standards EN 14387
- Effective time of the filter cartridge :  Test results with sample toxic gas vapors (with specified concentration, flow, temperature, humidity) are much higher than the requirements of the standard EN 14387 - copper Meaning longer usage time. Specifically:
+ protective effect time with  Hydrogen Cyanide is 2 times higher
+ The protective effect time with Chlorine is 2.5 times higher
+ The duration of protective effect with Hydrogen sulfide is 2 times higher
- Respiratory resistance: respiratory resistance is 60% smaller than EN 14387 and EN 143 regulations (equal to 58.8/100Pa). This is an important indicator, especially when used in hard working conditions. Lighter breathing helps the wearer spend less effort and can maintain wearing the mask for a long time.
- Filter box weight: 130g lighter than EN regulations.
- Meets EN136 Class 2, EN 14387, CE standards

DOTpro 460 K3 / Sorbent - Russia
- Use with MAG full mask to create respiratory protection against toxic ammonia gas in the air.
(Can be used with European full face masks)
- The product meets the criteria according to European standards EN 14387:2004 + A1 2008, including:
+ The protective effect time when tested with ammonia concentration of 7 mg/liter is 60 minutes
+ The resistance when an air flow of 30 liters/minute passes through is 140Pa
+ Weight 400g (20% lighter than EN standard regulations)

Unix 1000 + phin 531 / Sorbent (Russia)*
- Light weight, easy to use.
- Head harness: Easy to use, adjustable for a tight mask by adjusting size in 5 positions.
- Parts of the mask can be disassembled for easy cleaning.
- Designed to not interfere with wearing eye and head protection and noise-canceling earplugs.
- Filters out organic toxic gases; inorganic (such as Cl2, H2S, HCN,...); SO2, acid and ammonia.
- Effective time of the filter cartridge :  Test results with sample toxic gas vapors (with specified concentration, flow, temperature, humidity) are much higher than the requirements of the standard EN 14387 - copper Meaning longer usage time.
- Respiratory resistance: respiratory resistance is 60% smaller than EN 14387 and EN 143 regulations (equal to 58.8/100Pa). This is an important indicator, especially when used in hard working conditions.
- Lighter breathing helps the wearer spend less effort and can maintain wearing the mask for a long time.
-Filter box weight: 130g lighter than EN regulations.

S71/Bullard (USA).
- Material: HDPE
- Cone size adjustable vertically (2 front 2 back)
- Weight: 13 oz. (370g)
- American standard ANSI / ISEA: Z89.1-2014, Type I, level E, G
(Class E tested at 20,000 V for 3 minutes, leakage current ≤ 9mA)
- Quality certification meeting TCVN 6407:1998

SYNTHETIC SPECIAL 500 / ESCHBACH (Germany)
- Material: Polyester fiber, rubber coated inside
- Working pressure: 17 Bar
- Tested water pressure: 30 MPA
- Pipe diameter: 50mm
- Pipe length: 20m

UCD03HA / Vicadi (Vietnam)
- Material: made from natural rubber, red pink color
- Voltage used: 3kV
- Test voltage: 5KV, test time: 1 minute, detection current: <= 9 mA
- Standards apply TCVN 5586 -1991
- There is a factory test card and a typical test card

UCD03HA / Vicadi (Vietnam)
- Material: made from natural rubber, red pink color
- Voltage used: 3kV
- Test voltage: 5KV, test time: 1 minute, detection current: <= 9 mA
- Standards apply TCVN 5586 -1991
- There is a factory test card and a typical test card

U692/IEC35 - Vicadi - Vietnam*
- Material: made from natural rubber, red pink color
- Test voltage: 35KV, test time: 1 minute, detection current: <= 9 mA
- Standards apply TCVN 5586 -1991
- There is a factory test card and a typical test card
- Size 41, 42 IEC

U692/IEC30 / Vicadi (Vietnam)*
- Material: made from natural rubber, red pink color
- Test voltage: 30KV, test time: 1 minute, detection current: <= 9 mA
- Standards apply TCVN 5586 -1991
- There is a factory test card and a typical test card
- Size 41, 42 IEC

U692/CA / Vicadi (Vietnam)
- Material: made from natural rubber, red pink color
- Test voltage: 22KV, test time: 1 minute, detection current: <= 9 mA
- Standards apply TCVN 5586 -1991
- There are factory inspection sheets and typical tests

U692/CA / Vicadi (Vietnam)*
- Material: made from natural rubber, red pink color
- Test voltage: 22KV, test time: 1 minute, detection current: <= 9 mA
- Standards apply TCVN 5586 -1991
- There is a factory test card and a typical test card

DBS4 / Novax - Malaysia
- Features: Impact resistance, electrical insulation, chemical resistance, heat resistance, good abrasion resistance, anti-slip
- PE lining to enhance durability.
- Test voltage 20,000V
- Outsole resists electrical surges up to 18kV
- Standards: EN ISO 20345: 2011, EN 50321: 1999, CSA Z195-14 / ASTM F 2413-11, ASTM F1117-03

YS111-09 / Yotsugi - Japan
- Test voltage 20KV
- Working voltage: 7KV (AC)
- Color: brown

YS112 / Yotsugi - Japan
- Material: insulating rubber
- Usable voltage 26,500V AC, 39,750V DC
- Test voltage 30,000V AC
- Meets EN, CE, JIS (Japan) and ISO 9001 standards

TCD3KV-0.65x1 / Vicadi - Vietnam*
- Material: 100% insulating natural rubber
- Color: Red brown
- Dimensions: 0.65m x 1m x 5mm thick
- Voltage used: 3,000V AC
- Test voltage: 20,000V AC / 1 minute
- Leakage current ≤ 20 mA
- Each product comes with a factory inspection card

TCD3KV-1x1 / Vicadi - Vietnam*
- Material: 100% insulating natural rubber
- Color: Red brown
- Dimensions: 1m x 1m x 5mm thick
- Voltage used: 3,000V AC
- Test voltage: 20,000V AC / 1 minute
- Leakage current ≤ 20 mA
- Each product comes with a factory inspection card

TCD35KV / Vicadi - Vietnam
- Material: 100% natural insulating rubber
- Color: Reddish brown
- Size: 1x0.65m; 1x1m; 1x2m; 1x2.5m; 1x4m; 1x5m
- Thickness: 8mm
- Operating voltage: 35,000V AC
- Testing voltage: 35,000V AC / 1 minute
- Leakage current ≤ 20 mA
- Each product comes with a factory inspection certificate