TK2000 / Kenwood
- RF output power (High/Low): 5W/1W
- Noise: 65 dB
- Receiver sensitivity (Wide/Narrow): 0.25 μV / 0.28 μ
- Output audio power: 500 mW / 8 Ω
- Frequency range: 144-174Mhz
- Usage voltage: 7.5 V DC ±20 %
- Usage time: About 10 hours (KNB-63L battery)
- Working temperature: -20°C ~ +60°C
- Frequency stability: 5 ppm (TK2000)
- Light weight (203g including Li-Ion battery)
- Dimensions: (WxHxD): 54 x 113 x 24.9 mm
- Meets IP54 dustproof and waterproof standards
- Meets US military standards MIL-STD 810 C, D, E, F & G

CM4371-50 / HIOKI - Japan
- DC current measurement range: 20.00 A/600.0 A
- AC current range: 20.00 A/600.0 A
- DC/AC current range: 20.00A/ 600.0A
- DC voltage range: 600.0 mV to 1000 V, 5 scales
- AC voltage range: 6,000 V to 1000 V, 4 scales
- DC/AC voltage range: 6,000 V to 1000 V, 4 scales
- Resistance measurement: 600.0 Ω to 600.0 kΩ, 4 scales
- Capacitance measurement: 1,000 μF to 1000 μF, 4 scales
- Frequency range: 9,999 Hz to 999.9 Hz
- Check continuity:  [ON] 25Ω±10 Ω, [OFF] 245Ω±10 Ω
- Check diode: Open voltage ≤ DC2.0V, short circuit current: 200 μA.
- Temperature measurement:  -40.0 to 400.0 ˚C
- Clamp fork tight diameter: φ33 mm
- DC power measurement: 0.0 kVA to 600 kVA (up to 1200kA when used with Hioki P2000)

FT6031-50 / Hioki - Japan
- Measuring system: 2-pole method/ 3-pole method (switchable)
- Accuracy:
±1.5% rdg ±8 dgt
±1.5% rdg ±4 dgt
±1.5% rdg ±4 dgt
- Earth voltage: Accuracy: ±2.3% rdg ±8 dgt (50 Hz/60 Hz)
±1.3% rdg ±4 dgt (DC)
- Allowable ground potential: 25.0 V rms (DC or sine wave)

IR4053-10 / Hioki - Japan
- Output measurement voltage: 50/125/250/500/1000 VDC. In which the 500/1000 VDC ranges can be used for solar power systems.
- Maximum resistance measurement value: 100/250/500/2000/4000 MΩ
- Lower limit resistance value: 0.05/0.125/0.25/0.5/1 MΩ
- Measure DC voltage: 4.2V to 1000V, 4 scales
- Measure AC voltage: 420V / 600V, 2 scales

FT3701-20 / Hioki - Japan
- Non-contact remote temperature measurement:  -60.0 to 760.0°C; Resolution: 0.1°C
- Response time: 1 second
- Measurement wavelength: 8 to 14 μm
- Measuring area diameter: φ100 mm at a distance of 3000 mm

UNIX203 P3RD / Sorbent - Russia
- Use with panoramic masks UNIX 6100, UNIX 5000 and UNIX 5100 or half-masks UNIX 1000 and UNIX 1100 to protect respiratory organs from aerosols (more than 200 mg/m3) and organic gases and vapors harmful substances present in the air of the work area
- The filter is attached to the glass using a bayonet connection. The UNIX 203 P3 RD RD filter plate is high-performance, reusable and dust-proof
- Ambient temperature from -40 to + 40 ° С.
- Meets standards: EN 143

P3 RD / Sorbent (Rusia)*
- The filter is designed to protect the respiratory system when working in environments contaminated with different types of dust (aerosols).
- The filter is effective when the free oxygen concentration in the working area air is > 17% and the dust concentration (aerosol) is up to 200 mg/m3 and higher.
- Filter meets European standards EN 143:2000+A1:2006  with the highest filtration efficiency of P3 (99.95%).
- Reusable filter ( R symbol)  with dust protection ( D symbol).
- DOTeco P3 RD filter is used with full hoods UNIX 5000, UNIX 5100 and half hoods UNIX 1000, UNIX 1100 to filter dry dust and dust in high humidity conditions.
- Its operating temperature  ranges from -40 to + 40 °C.
- Manufacturer: Sorbent - Russia

Neomask face mask filter NC95 / Vietnam
- Genuine high-quality activated carbon filter
- Prevents air pollution for all conditions such as: Gasoline smell, chemicals, motorbike riding, cycling, dust... Protects the respiratory system
- Made in Vietnam

64-MAX / Fluke - USA
- Temperature range: -30°C - 600°C (-22°F - 1112°F)
- Accuracy (Calibration at ambient temperature 23°C +/-2°C): ± 1.0°C or ± 1.0% of reading ; ± 2.0°C at -10°C to 0°C ; ± 3.0°C at -30°C to -10°C
- Optical resolution: 20:1 (based on 90% power)
- Response time (95%): <500 ms (95% of reading)
- Emissivity: 0.10 to 1.00
- Spectral response: 8-14 microns
- Weight: 255g (8.99 oz)
- Dimensions: 175x85x75 mm
- Protection class IP54
- Flash and large, easy-to-read LCD display for easy viewing even in dark environments.

Model: WH4000
- Mask material: PP plastic
- Brightness: DIN3; Darkness: DIN11
- Sensitivity: 1/10,000s at normal temperature
- Delay time: 0.5s
- Sensor: 02 pieces
- Power supply: Rechargeable battery and solar energy
- Dustproof, waterproof; UV & IR protection: Up to 16
- Overall size: 110 x 90 x 8mm (4-1/3” x 3-5/9” x 1/3”)
- Field of view: 98 x 35mm (3-6/7” x 1-1/3”)
- Weight: 430g
- Application: Arc welding, MIG, TIG

- Features: Toe impact resistance, puncture resistance, shock absorption, excellent abrasion resistance, odor-resistant insole
- Premium Type: Equipped with a dial adjustment system for laces
- Material: Split leather combined with highly breathable mesh fabric
- Toe Cap: Steel Toe cap for toe protection against impacts
- Sole: Pyrone + rubber; lightweight, anti-slip, high friction resistance
- Safety Standard: Certified by KCS Korea
- Size: 230 - 300mm (35 ~ 49)
- Warranty: 6 months

- Mã sản phẩm: 2104N4214 (Hãng Honeywell - Mỹ)
- Sản xuất tại Anh quốc, cấp kèm chứng chỉ COC copy NSX, Giấy hiệu chuẩn của NSX
- Đầu dò khí cháy hồng ngoại Searchline Excel CrossDuct Excel cross-duct gas detection system, short range (0.5 to 2.5m), 4 to 20mA (source) and Modbus outputs, ATEX/IECEx, fully wired with flexible conduit, electro polished 316SS. Includes etection
block, single tile heated reflector panel, Ex e junction box with M20/M25 cable entries and 316SS mounting plate. Methane calibration only.
- Bảo hành: 12 Tháng kể từ ngày giao hàng theo tiêu chuẩn nhà sản xuất

ABC 50KG / Vinafoam - VN
- Cylindrical cylinder body made of mild steel, low carbon content, type ST14. The outer layer is painted with durable electrostatic paint.
- Material is chrome-plated cast steel, valve accessories, pressure gauge stamped according to CE/European standards
- Nozzle made of PVC plastic ensures durability and excellent flexibility in the operating temperature range. Nozzle - with complete fire extinguishing foam nozzle.
- Multi-purpose dry powder fire extinguishing is effective for ABC fires in accordance with TCVN 6102:2020 standard
- Pure N2 propellant is fully pressurized by the fire extinguisher, no welds, no bulky propellant accessories, flexible and convenient to use.
- TCVN 7027:2013 (for complete fire extinguisher trolley).
- Suitable for class A, class B and class C fires
* With PCCC stamp

VF50 / Vinafoam - VN
- 50L water-based wheeled fire extinguisher
- Body made of steel with Compression/Welding technology. Red electrostatic painted outer layer
- Nozzle made of PVC plastic, 4m long, with complete nozzle
- AFFF fire-fighting foam; Pure N2 propellant
- Fire capacity: 4A 144B
- Operating temperature: 5oC to 60oC
- Test pressure: 25bar; Working pressure: 11-13 bar
- Spray range: 7-9m; Spray time: 125 seconds
- Meets TCVN 7027:2013 standards
- Dimensions (mm): Ø 300 x 1150
- Total weight: 80kg
* With PCCC stamp

North 54001 + 7580P100 / Honeywell - USA
- Material: flexible plastic
- Includes 1 North 54001 full mask and 1 pair of 7580P100 filters
- Tempered glass surface is scratch and impact resistant according to ANSI standards
- The nose cap is designed to hug tightly to help breath air escape better;
- Soft mask pad with good elasticity helps the contact between the mask and face fit tightly, suitable for many face types.
- Has an adjustable head strap. The exhalation valve located in the nose is designed to hug closely to help the breath to escape better, reducing mist condensation.
- Usage environment: dust, gases, toxic chemicals, polluted environment, gases/gas/vapors...in manufacturing and transportation industries.

Heat-Resistant Clothing 500ºC / CHINA
- Manufacturer: KT Safety International LTD
- Material: Aluminum-coated fabric
- Components: Includes jacket, pants, hood, gloves, and boot protectors
- Features: The outer layer is aluminum-coated, providing excellent heat reflection and protection. The jacket is designed to resist hot air infiltration and can withstand temperatures up to 500ºC.
- Protection: Safeguards the user from hazardous environments with exposure to flames and splashes of molten materials.

- Material: ceramic
- Function to signal the water supply pipe system below and indicate the direction of the water pipe system.
- Used in places where the water pipe system changes direction, on the ceramic marker surface there are 2 direction vectors.
- High durability, good resistance to mechanical impacts

- Material: Cowhide surface
- Cowhide with technical thickness from 1.6mm or more, ensuring superior durability
- Steel toe cap, anti-impact toe when colliding
- Cotton lining inside the shoe is moisture-absorbent, breathable and comfortable to use
- Steel insole to prevent punctures and other sharp iron objects
- Oil-resistant PU sole has good elasticity, high adhesion, high temperature resistance, anti-slip, heat-resistant, cold-resistant, anti-static
- Height: 27cm
- Size: 39-45
- Application: suitable for use in cold storage, construction sites, factories, mechanical workshops, mines, drilling rigs, industrial parks...

1630-2 FC/ Fluke
- Maximum ground voltage: 1000 V
- Digital LCD display: 9999 counts
- Reference temperature: 23 °C ±5 °C (73 °F ±9 °F)
- Frequency range: 40 Hz to 1 kHz
- Operating temperature: -10 °C to +50 °C
- Dimensions (LxWxH): 283x105x48 mm
- Weight: 880g (31 oz)
- Standards: IEC/EN 61010-1 ; IEC/EN 61010-2-032: CAT IV 600 V / CAT III 1000 V ; IEC/EN 61557-13 ; IEC/EN 61557-5 ; IEC/EN 61557-5

376FC / Fluke
- Clamp opening: 34 mm
- Probe inner diameter: 7.5 mm
- Probe cable length: 1.8 m
- Operating temperature: 10°C – +50°C
- Batteries 2 AA, NEDA 15A, IEC LR6
- Dimensions (LxWxH): 246 mm x 83 mm x 43 mm
- Weight: 388 g
- Standards: EN/IEC 61010-1:2001 CAT III, CAT IV ;