GTL 3 / BOSCH
- Laser Diode: 630-650 nm
- Operating range: 20 m
- Maximum operating time: 18 h in 2-line mode, 12 h in 3-line mode
- Accuracy: ±0.2 mm/m* (*additional error depending on usage)
- Power supply: 4 x 1.5V LR6 (AA)
- Weight: approximately 0.44 kg
- Laser color: Red
- Operating temperature: -10 – 50 °C
- Storage temperature: -20 – 70 °C

GPL 5 / BOSCH
- Laser Diode: 635 nm, < 1 mW
- Operating range: 30 m
- Maximum operating time: 24 h
- Accuracy: ± 0.3 mm/m* (*additional error depending on usage)
- Power supply: 3 x 1.5V LR6 (AA)
- Weight: approximately 0.25 kg
- Self-leveling range: ± 5° (vertical axis), ± 3° (horizontal axis)
- Laser color: Red
- Operating temperature: -10 – 40 °C
- Storage temperature: -20 – 70 °C
- Projection: 5 points
- Dust and water protection: IP5X

GLL 5-50 X + BT 150 / BOSCH
- Laser Diode: 630-650 nm < 1 mW
- Operating range: 15 m
- Working range with receiver: 50 m
- Maximum operating time: 24 h
- Accuracy: Horizontal laser: ± 0.2 mm/m*; Vertical laser: ± 0.3 mm/m* (*additional error depending on usage)
- Self-leveling range: ± 3°
- Power supply: 4 x 1.5V LR6 (AA)
- Weight: approximately 0.5 kg
- Laser color: Red
- Operating temperature: -10 – 45 °C
- Storage temperature: -20 – 70 °C
- Tripod mount: 5/8”

GLL 5-50 X / BOSCH
- Laser Diode: 630-650 nm < 1 mW
- Operating range: 15 m
- Working range with receiver: 50 m
- Maximum operating time: 24 h
- Accuracy: Horizontal laser: ± 0.2 mm/m*; Vertical laser: ± 0.3 mm/m* (*additional error depending on usage)
- Self-leveling range: ± 3°
- Power supply: 4 x 1.5V LR6 (AA)
- Weight: approximately 0.5 kg
- Laser color: Red
- Operating temperature: -10 – 45 °C
- Storage temperature: -20 – 70 °C

GLL 3-80 / BOSCH
- Laser Diode: 630-650 nm < 10 mW
- Operating range: 30 m
- Working range with receiver: 120 m
- Maximum operating time: 4 h in 3-line mode
- Accuracy: ± 0.3 mm/m* (for 4 horizontal intersection points; **additional deviation depending on usage)
- Self-leveling range: ± 4°
- Power supply: 4 x 1.5V LR6 (AA)
- Weight: approximately 0.82 kg
- Laser color: Red
- Operating temperature: -10 – 40 °C
- Storage temperature: -20 – 70 °C
- Tripod mount: 1/4”, 5/8”

GLL 25 / BOSCH
- Laser Diode: 630-650 nm < 1 mW
- Operating range: 10 m (above), 5 m (below), 30 m (horizontal)
- Maximum operating time: 12 h in point and line mode, 24 h in 5-point mode, 30 h in line mode
- Accuracy: Horizontal laser and point beam: ± 0.3 mm/m*; Vertical point beam: ± 0.5 mm/m* (*additional error depending on usage), Horizontal laser: ± 0.2 mm/m*; Vertical laser: ± 0.3 mm/m* (*additional error depending on usage)
- Self-leveling range: ± 4°
- Power supply: 4 x 1.5V LR6 (AA)
- Weight: approximately 0.6 kg
- Laser color: Red
- Operating temperature: -10 – 50 °C
- Storage temperature: -20 – 70 °C
- Tripod mount: 1/4”, 5/8”

Electric welding mask 3350 / VIKING-USA
- 4C Lens Technology, 1/1/1/1 Optical Clarity and Extra Large Viewing Area of ​​12.5 Square Inches
- Innovative X6 headgear helps distribute weight, reduce pressure and optimize balance

SZ-MST S2/China
- Filter size: 110x90x10mm, fixedly mounted on the welding mask. Many other types of filters of the same size can be replaced with this mask.
- View window size: 92x42mm
- Light / dark status: DIN 4/DIN 9-13
- Adjustment knob (left side of mask): When placed in the off position, the darkness is 4 (corresponding to the case of eye protection when welding), rotate clockwise to get darkness 9,10,11, 12,13 depending on the electric current intensity when welding.
- Extremely fast automatic "darkness" adjustment speed: 1/25,000 second
- Delay time: adjustable from 0.2 to 0.8 seconds (turn the DELAY knob from min to max)
- Use lithium batteries and solar batteries
- Light sensitivity: Adjustable from low to high (rotate knob from LO to HI)
- Green
- The product meets European EN standards

SZ-MST S1/ China
- Filter size: 110x90x10mm, fixedly mounted on the welding mask. Many other types of filters of the same size can be replaced with this mask.
+ Visible area size: 100x50mm
+ Light / dark status: DIN 4/DIN 9-13
- Adjustment knob (right side of mask): Rotate clockwise to get darkness 9,10,11,12,13 depending on the intensity of the electric current when welding.
- Extremely fast automatic "darkness" adjustment speed: 1/25,000 second
- Light sensitivity: Adjustable (rotate knob from LO to HI)
- Delay time: 0.6 seconds
- Power supply: 2 small batteries and solar battery
- On and off mode: Open by pressing button (ON) - Turn off automatically
- Light sensitivity: Adjustable (rotate knob from LO to HI)
- The product meets EN379:2003, EN 169:2002, EN 175:1997, ANSI Z87.1.2010 standards

TZL30/ China
- The mask covers the head and face with aluminum-coated fabric to prevent heat radiation and fire, and is equipped with a filter box for respiratory protection.
- Usage time: 30 minutes
- Objects of protection: CO gas (Carbon monoxide), HCN (hydrocyanic acid), toxic smoke and mist...
- Application: Used for emergency escape from fire areas.

EB-400 / Juli
- Weight: 6.4kg
- Bending force: 120kN
- Bending capacity: 120 times (with Cu 150mm2)
- Bending range: 16-400mm2
- Bending cycle: 6s-18s (depending on cable size)
- Belt sizes: 16,25,35,50,70,95,120,150,185,240,300,400 mm2.
- Battery source: 18V-3.0 Ah
- Charging time: 1 hour

EK13042-CFM/KlauKe
- 13 ton hydraulic press pliers operated by rechargeable battery, Control pressure by button.
- C-shaped pliers mouth with large mouth size up to 42mm.
– Use cose clamps with sizes from 10-400mm ² and WR clamps.
- Can use steel core cable cutting belt.
– Quickly and easily remove and install the belt into the mouth of the pliers
– Automatic valve release when pressure is completed monitored by pressure sensor.
– There is a pressure release valve to return the moving part of the pliers mouth to its original position.
– The pliers head can rotate 360° around the axis of the pliers body.
– Integrated LED lights illuminate the work area
– There is an indicator light when the pressure does not meet the requirements and when the battery is low.
– Using 18V Li-ion battery allows long usage time.
– IPS smart control technology
– Main accessories included with the device: carrying case, 1 battery and 220kV charger included.
(additional computer connection software can be used to analyze the pressure for each press and the number of presses for maintenance work  if equipped).

ED-400 / Juli
- Weight: 6.4kg
- Bending force: 120kN
- Bending capacity: 120 times (with Cu 150mm2)
- Bending cycle: 6s-18s (depending on cable size)
- Belt sizes: 16,25,35,50,70,95,120,150,185,240,300,400 mm2.
- Battery source: 18V-3.0 Ah
- Charging time: 1 hour

BZ-400 / Juli
- Weight: 7.3kg
- Bending force: 120kN
- Bending capacity: 120 times (with Cu 150mm2)
- Bending cycle: 6s-8s (depending on cable size)
- Belt sizes: 16,25,35,50,70,95,120,150,,185,240,300,400 mm2.
- Battery source: 18V-3.0 Ah
- Charging time: 1 hour
- 360 degree rotating bending head for easy operation. Has LED lights and LCD screen (displays bending time, amount of electricity, error message)

HBC1818/INGCO
- High quality Cr-V blades should be highly durable, resistant to force, and will not wear out or rust over time.
- Maximum cutting range: 8mm
- Dimensions: 18” (450mm)
- Highly applicable in many industries such as mechanics, factories, repair, manufacturing, machinery warranty...

HYSC-24 / Kudos
- Length: 360 mm
- Weight: 2.6 kg
- Maximum pressure: 700 bar
- Capacity: 7.45 tons / 66.3 kN
- Cutting capacity: 24mm cable / Copper wire: 24mm / Aluminum wire: 24mm / ACSR: 24mm / Mild steel bar: 16mm
- 180˚ rotating head for convenient operation. Superior guillotine cutting for less jamming than guillotine mowers. All blades can be easily replaced.
- Top flip latch for easy insertion of cutting material. Single stage pump action with return spring. No setup time required.

HYSC-32 / Kudos
- Length: 580 mm
- Weight: 9.1 kg
- Maximum pressure: 700 bar
- Capacity: 15.82 tons / 140.7 kN
- Cutting capacity: 32mm cable / 25-32mm steel / Copper wire: 32mm / Al wire: 32mm / ACSR: 32mm
- 180˚ rotating head for convenient operation. Superior guillotine cutting for less jamming than guillotine mowers. All blades can be easily replaced.
- Top flip latch for easy insertion of cutting material. Single stage pump action with return spring. No setup time required.

S24 / Kudos
- Length: 425 mm
- Weight: 3.9 kg
- Maximum pressure: 700 bar
- Capacity: 8.78 tons / 78.1 kN
- Cutting capacity: Cable 18-24 mm / Steel 20 mm / Copper wire: 24 mm / Aluminum wire: 24 mm / ACSR: 24mm
- 180˚ rotating head for convenient operation. Superior guillotine cutting for less jamming than guillotine mowers. All blades can be easily replaced.
- Top flip latch for easy insertion of cutting material. Single stage pump action with return spring. No setup time required.

HYSC-45 / Kudos
- Length: 683mm
- Weight: 6.7kg
- Force: 700bar ; 10.73 tons ; 95.5 kN
- Cutting capacity: 40mm
- Single acting cylinder with return spring. The locking pin type head and 180˚ rotation allow for easy cutting positioning.
- Guillotine cutting for less jamming than shear cutting. No setup time required. The blade can be easily replaced.

ESG 45 / KLAUKE - Germany
- Cutting force: 70 kN
- Maximum cutting diameter: 45 mm
- Power source: Bosh/Makita rechargeable battery type 18V 3.0 Ah (or Bosch 5.0 Ah)
- Weight (including battery): 5.9 kg
- Operating temperature: -10°C - 40°C
- Used to cut copper cables, aluminum cables, ACSR cables. Also suitable for cutting aluminum, copper and steel in round shapes.
- All data can be read easily via Bluetooth. Save time when cutting multiple times thanks to the quick opening mechanism. There are LED lights that illuminate the work area