ESS-WFB / Bullard - USA
- Glass has high heat resistance, good for use by fire fighters. Goggles can be worn directly or combined with a protective helmet.
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace.
- The product meets NFPA 1971-2000 and ANSI Z87.1 standards

ESS-XTO / Bullard - USA
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace; The elastic strap easily hangs around the top of the helmet.
- Good for use in high temperature environments, fire resistant, suitable for equipping fire fighters.
- The product meets American standards NFPA 1971-2000 and ANSI Z87.1

SYNTHETIC SPECIAL 500 / ESCHBACH (Germany)
- Material: Polyester fiber, rubber coated inside
- Working pressure: 17 Bar
- Tested water pressure: 30 MPA
- Pipe diameter: 50mm
- Pipe length: 20m

Việt Nam
- Sản xuất theo thông tư 48 Bộ Công An
- Chất liệu: nhựa
- Có lót thép chống đâm xuyên, chống thấm nước
- Là trang bị dùng cho đơn vị dân phòng chữa cháy, không dùng cho lính cứu hoả chuyên nghiệp.
- Màu xám đế đỏ
- Size: 41, 42, 43

FB-01 / Penco
- Material: Polyethylene synthetic rubber
- Anti-fingering steel tip
- Anti-pierce inner steel sole. Anti-piercing force ≥1100N
- Withstand voltage ≥5000V. Breaking force  ≥10.78KN
- Color: Black combined with gold
- Weight  3 - 3.6kg / pair (Depending on size)
- Features: Anti-abrasion, anti-cut, anti-puncture, anti-fire, heat-insulating, electrical, anti-oil, anti-slip, anti-acid,  alkali...Very comfortable and pleasant to wear.

FH911/Bullard (USA)
- Weight: 490g
- Dimensions: Width - 11"(280mm); Length - 12 ¾" (325mm); Height - 6"(150mm)
- Hat body is made of heat-resistant and high impact-resistant material.
- Adjust helmet size with knob (FRS6RC) or button (FRS6PC)
- There are 3 available positions inside the hat body to connect to the heat-resistant spine cover Model R711
- The outside of the helmet body has a latch to attach fire goggles (Model ESS -XTO or ESS-WFB has a wide field of view)
- The product meets NFPA 1977:2011 standards

Vietnam
- Material: powder coated aluminum
- Printed red paint that does not fade
- Bearing weight: 60kg
- Size: 20x20x23-33cm

Vietnam
- Material: powder coated aluminum
- Printed red paint that does not fade
- Bearing weight: 80kg
- Dimensions: 40 x 21 x 30cm

Fire Blanket 1.8x1.8 / Yutraco (Korea)*
- Material: heat-resistant fireproof fiberglass
- Heat resistant to 700oC, does not flow, does not burn, does not shrink
- Non-rotting, anti-corrosion, non-toxic
- Has black strap and red carrying bag
- Standard EN1869:1997

Ambulance stretcher/VN*
- Load capacity: 100kg
- Size of stretcher surface: 1700 x 530 mm
- Overall size: 2210 x 550 x 200 mm
- Dimensions after folding: 1110 x 250 x110 mm
- Weight: 6kg
- Used in rescuing factories, industrial parks, medical stations, commercial centers, factories

Fire Pro-01 fireproof suit, type 4, heat resistant to 300 degrees, dark blue according to new TT150 (Vietnam)
Includes 5 dishes:
- Nomex 4-layer clothing, weight 2.5kg/set.
- Waterproof, heat resistant, heat resistant to 300 degrees Celsius
- Red hat has an aluminum nape protector
- Specialized black and yellow heat-resistant boots with straps
- Dark blue gloves
- 3M 1860 mask
Has inspection stamp.

Vietnam - China
- Material: slow burning Nomex fabric
- 2 layers: fireproof layer and lining layer
- Withstands temperatures of 200~300ºC
- Subject to open flame for 2~7s
- Separate shirt, separate pants
- Has 3M heat-resistant reflective wire
- Color: Dark blue (available), Orange, Sand yellow
- Size: M, L

MT5 / China
- Material: liquefied CO2 gas, pressurized
- The tank shell is made of thick, durable steel
- Used to extinguish fires of solid substances, gases, and electrical equipment
- After spraying, CO2 gas will evaporate
- Weight of gas in tank: 5kg
- Weight + bottle: 14.5kg
- Dimensions: 54 x 13.5 x 13.5cm
- Working temperature: from -20ºC to 50ºC

MT3 / China
- Material: liquefied CO2 gas, pressurized
- The tank shell is made of thick, durable steel
- Used to extinguish fires of solid substances, gases, and electrical equipment
- After spraying, CO2 gas will evaporate
- Weight of gas in tank: 3kg
- Weight + bottle: 10.5kg
- Dimensions: 48 x 12.5 x 12.5cm
- Working temperature: from -20ºC to 50ºC

MT24 / China*
- Material: liquefied CO2 gas, pressurized
- The tank shell is made of thick, durable steel
- Used to extinguish fires of solid substances, gases, and electrical equipment
- After spraying, CO2 gas will evaporate
- Weight of gas in tank: 24kg
- Has caster wheels and long spray nozzle
- Dimensions: 60 x 84 x 140cm
- Working temperature: from -20ºC to 50ºC
- Has a police stamp plus 30,000 VND
- Warranty: 6 months

Anbaco / Vietnam
- Material: mica
- Size: 30cm x 15cm

Fire ban sign / Vietnam
- Material: aluminum metal / mica
- Printed paint does not fade
- Size: 40cm x 16cm

No Smoking Sign/ Vietnam
- Material: aluminum metal / mica
- Printed paint does not fade
- Size: 40cm x 16cm

ZEVS-U / Sorbent - Russia*
- Effective protection of toxic gases and CO produced during fires for > 30 minutes ~ 60 minutes
- ZEVS-U with hood for respiratory, eye, face and head protection, equipped to escape from contaminated areas,  generated by combustion: carbon monoxide, other toxic chemical gas vapors, aerosols The gas in the smoke, dust, and mist created by the fire.
- ZEVS-U maintains its protective properties even when subjected to temperature conditions of up to 200 degrees Celsius for 1 minute and the impact of a flame with a temperature of 800 ± 50 degrees Celsius for 5 seconds.
- Rope is a device used to help a person escape from fires in houses, hotels, hospitals, buildings and other similar objects. Single use only.
- ZEVS-U meets the requirements of the European standard EN 403: 2004.
- Directly imported goods have CO and CQ

USRX/Bullard (USA)
- Hat body is made of heat-resistant and high impact-resistant material.
- Adjust the hat size with the knob
- There are 3 available positions inside the hat body to connect to the heat-resistant spine cover
- There is a latch on the outside of the helmet body to attach fire goggles
- Certified by NFPA 1971-2013 and meets NFPA 1951-2013 standards