ESS-WFB / Bullard - USA
- Glass has high heat resistance, good for use by fire fighters. Goggles can be worn directly or combined with a protective helmet.
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace.
- The product meets NFPA 1971-2000 and ANSI Z87.1 standards

ESS-XTO / Bullard - USA
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace; The elastic strap easily hangs around the top of the helmet.
- Good for use in high temperature environments, fire resistant, suitable for equipping fire fighters.
- The product meets American standards NFPA 1971-2000 and ANSI Z87.1

FCA8 / Blue Eagle - Taiwan
- Chất liệu : polycarbonate
- Kích thước : 20 cm x 48 cm ( 8" x 19")
- Độ dày : 1.5mm
- Giá trị bảo vệ hồ quang là 11 Cal/cm²
- Bộ lọc tia UV theo tỷ lệ : 2-1.7
- Tiêu chuẩn : EN166, ANSI Z87.1, CSA Z94.3, NFPA 70E, ASTM 2178, GS -ET 29

WH-754 / Longdar (Taiwan)*
- Material: Polypropylene, resistant to mechanical impact and sparks
- Window size : 4.5"×5.25"(114mm x 133mm)
- Meets ANSI Z87.1 standards

WH-701 / Longdar (Taiwan)
- Material: Polypropylene
- Headgear type adjusts the knob board
- Glass window 50 x 107 mm
- Welding glass layer: 1 tempered glass and 1 No. 11 welding glass
- Inner layer: 1 eye protection glass
- Meets ANSI Z87.1 standards

WH-770 / Longdar (Taiwan)
- Material: Polypropylene
- Hat mounting type, fits all Taiwanese hats
- Glass window 50 x 107 mm
- Welding glass layer: 1 tempered glass and 1 No. 11 welding glass
- Inner layer: 1 eye protection glass
- Meets ANSI Z87.1 standards

Model 48-22-8931
- Brand: Milwaukee USA
- Country of manufacture: China.
- Material combined between nylon and lycra creates a comfortable feeling. High-performance polyethylene is woven into the gloves to protect cuts
- Glove palms are made from patterned nitrile rubber to create the best grip and durability.
- SMARTSWIPE™ palm and fingertips allow use of touchscreen devices without removing gloves
- The product meets ANSI & EN standards. (ANSI Cut level 3)

Model 48-22-8952
- Brand: Milwaukee USA
- Country of manufacture: China.
- Material combined between nylon and lycra creates a comfortable feeling
- Glove palms are made from patterned nitrile rubber to create the best grip and durability.
- SMARTSWIPE™ palm and fingertips allow use of touchscreen devices without removing gloves
- The product meets ANSI & EN standards. Best-in-class puncture rating for resistance to ANSI 5 sharp materials

Contructo / Jogger (Belgium-China)*
- Material: Cotton/polyester lining with green latex coating
- Wrinkled latex coating provides good grip, friction, abrasion resistance
- Standard: ANSI/ISEA 105:2016; EN ISO 21420:2020 ; EN 388:2016
- Used in jobs involving grease, chemicals and mild acids.
- Size: 7~11

SZ-MST S1/ China
- Filter size: 110x90x10mm, fixedly mounted on the welding mask. Many other types of filters of the same size can be replaced with this mask.
+ Visible area size: 100x50mm
+ Light / dark status: DIN 4/DIN 9-13
- Adjustment knob (right side of mask): Rotate clockwise to get darkness 9,10,11,12,13 depending on the intensity of the electric current when welding.
- Extremely fast automatic "darkness" adjustment speed: 1/25,000 second
- Light sensitivity: Adjustable (rotate knob from LO to HI)
- Delay time: 0.6 seconds
- Power supply: 2 small batteries and solar battery
- On and off mode: Open by pressing button (ON) - Turn off automatically
- Light sensitivity: Adjustable (rotate knob from LO to HI)
- The product meets EN379:2003, EN 169:2002, EN 175:1997, ANSI Z87.1.2010 standards

GCC-9381 / Memphis - USA
- White gloves, made from stainless steel fibers  outside this textured synthetic fiber cover allows the  hand to be comfortable when worn and  does not shrink.
- Cut resistance reaches the highest level (level 5 according to ANSI-US standards)
- The surface is attached with PVC plastic panels to increase grip when holding objects.
- Suitable for use when processing food according to FDA (US Food and Drug Administration) certification. Imported by Anbaco

HR36 / Blue Eagle - Taiwan
- Material: ABS
- Standard insulation Class E 20,000 volts
- Ratchet helmet. 6-point shock absorbing helmet cage
- Color: White, red, yellow, orange, blue, green
- Standard: EN397, ANSI Z89.1

AW7R / Blue Eagle
- Material: Heat-resistant PP plastic
- Features: Impact resistance, UV, IR, and strong light resistance when welding; Automatically adjusts light to suit the welding environment; Fireproof and heat-resistant; Insulation
- Light state: Shade 4
- Dark state: Group 1 (Shade 5, 7) and Group 2 (Shade 8, 9, 10, 11, 12)
- Switching time:
+ Light → Dark: 1/10,000 seconds
+ Dark → Light: customizable (0.1s, 0.3s, or 0.5s)
- Power: Rechargeable lithium battery (Fast charging via USB - Micro USB cable)
- Filter size: 94mm x 43mm
- Standards: EN379, EN175, ANSI Z87.1, Z94.3