KS209 / Vietnam
- The shoe sole is molded with rubber
- Shoes are made from animal skin
- Features: impact-resistant steel toe cap, anti-nail, anti-slip, oil-resistant sole.
- There is a typical test sheet TT3
- Size: 37- 44

KT209 / Keep - VN*
- The shoe sole is molded with rubber
- Shoes are made from imported animal leather, steel uppers are anti-fingerprinting, anti-nail, anti-slip, and anti-oil.
- There is a typical test sheet TT3
- Size: 37- 43

KS2092-Keep - VN*
- The shoe sole is molded with rubber
- Shoes are made from animal skin, steel uppers are anti-fingerprinting, anti-nail, anti-slip, and anti-oil.
- There is a typical test sheet TT3
- Size: 37- 44

Unix5100 + filter 531 (A1B1E1K1) / Sorbent (Rusia)*
- Material: Silicon
- Filter cartridge 531 with the ability to filter inhaled air from organic, inorganic and acidic gases and vapors, ammonia and its organic derivatives. The filter is used when the volumetric oxygen content in the air is at least 17%, with the content of gases and vapor harmful substances at ambient temperatures from - 40 to + 40 ° C.
- The product meets and exceeds  European standards EN 14387
- Effective time of the filter cartridge :  Test results with sample toxic gas vapors (with specified concentration, flow, temperature, humidity) are much higher than the requirements of the standard EN 14387 - copper Meaning longer usage time. Specifically:
+ protective effect time with  Hydrogen Cyanide is 2 times higher
+ The protective effect time with Chlorine is 2.5 times higher
+ The duration of protective effect with Hydrogen sulfide is 2 times higher
- Respiratory resistance: respiratory resistance is 60% smaller than EN 14387 and EN 143 regulations (equal to 58.8/100Pa). This is an important indicator, especially when used in hard working conditions. Lighter breathing helps the wearer spend less effort and can maintain wearing the mask for a long time.
- Filter box weight: 130g lighter than EN regulations.
- Meets EN136 Class 2, EN 14387, CE standards

DOTpro 460 K3 / Sorbent - Russia
- Use with MAG full mask to create respiratory protection against toxic ammonia gas in the air.
(Can be used with European full face masks)
- The product meets the criteria according to European standards EN 14387:2004 + A1 2008, including:
+ The protective effect time when tested with ammonia concentration of 7 mg/liter is 60 minutes
+ The resistance when an air flow of 30 liters/minute passes through is 140Pa
+ Weight 400g (20% lighter than EN standard regulations)

Unix 1000 + phin 531 / Sorbent (Russia)*
- Light weight, easy to use.
- Head harness: Easy to use, adjustable for a tight mask by adjusting size in 5 positions.
- Parts of the mask can be disassembled for easy cleaning.
- Designed to not interfere with wearing eye and head protection and noise-canceling earplugs.
- Filters out organic toxic gases; inorganic (such as Cl2, H2S, HCN,...); SO2, acid and ammonia.
- Effective time of the filter cartridge :  Test results with sample toxic gas vapors (with specified concentration, flow, temperature, humidity) are much higher than the requirements of the standard EN 14387 - copper Meaning longer usage time.
- Respiratory resistance: respiratory resistance is 60% smaller than EN 14387 and EN 143 regulations (equal to 58.8/100Pa). This is an important indicator, especially when used in hard working conditions.
- Lighter breathing helps the wearer spend less effort and can maintain wearing the mask for a long time.
-Filter box weight: 130g lighter than EN regulations.

S71/Bullard (USA).
- Material: HDPE
- Cone size adjustable vertically (2 front 2 back)
- Weight: 13 oz. (370g)
- American standard ANSI / ISEA: Z89.1-2014, Type I, level E, G
(Class E tested at 20,000 V for 3 minutes, leakage current ≤ 9mA)
- Quality certification meeting TCVN 6407:1998

Priscm Clean DMS-1001A / Kukje - Korea
- Material: high density ABS plastic
- Domed structure with impressive load-bearing ribs, creating high mechanical impact resistance and a smooth surface.
- The forehead is covered with soft and smooth foam to help absorb sweat.
- The back of the hat has a twist lock to adjust the size to suit the wearer's head.
- There is foam lining inside the hat to absorb impact force on the hat
- Shock absorber made of 3 durable Polyester strings with 6 damping points.
- The "Y" shaped hat strap is firmly fixed and has a buckle to help put it on or take it off easily.
- There is a rainwater drainage ditch around the rim of the labor helmet.
- Products meet standards: KOSHA, ISO 9001-2008
- Have C/O, C/Q and quality inspection certificate of imported goods of Quatest 3 (shock absorber, anti-pierce, anti-burn).

DDA460ZK / Makita
- Weight: 5.7-6.4 kg
- Dimensions: 538x128x223 mm
- Adjust the machine to 2 speeds: High and Low
- Ability to drill in wood:
+ Chicken intestine drill bit: 50 mm
+ Self-guided drill bit: High 65 mm / Low 118 mm
+ Hole saw: High 105 mm / low 159 mm
- Drilling capacity on steel: 13 mm
- No-load speed: High 0-1,400 rpm; Low 0-350rpm
- Vibration/Vibration Speed: Drilling into metal: 2.5 m/s² or less
- Compatible battery: BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /BL1840B / BL1850 / BL1850B / BL1860B
- Compatible Charger: DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH
(Product does not include battery or charger)

GSB 550 Suitcase set of 80 pieces / BOSCH
- Power: 550 W
- Weight: 1.8 kg
- Dimensions: 65.5x262x253mm
- No-load speed: 2,800 rpm
- Beating speed: 41,800 l/min
- Chuck: 13 mm
- Drilling diameter on concrete: 13 mm
- Drilling diameter on steel: 10 mm
- Drilling diameter in wood: 25 mm
INCLUDE:
- 01 Carrying case + Bosch GSB 550 Professiona Drill
- 5 wall cavity diameters: 4, 5, 6, 8, 10 mm.
- 4 wood drill bits: 4, 5, 6, 8 mm.
- 30 screws: 10 x 3Ø/30mm, 10 x 4Ø/40mm, 10 x 5Ø/50mm.
- 30 plastic switches: 10 x 5Ø/25mm, 10 x 6Ø/30mm, 10 x 8Ø/35mm.
- 4 Screwdrivers.
- 1 Electric meter, tester/Insulation tape/scissors/Hammer/wire cutting pliers

D401/ Double Shield - Taiwan
- Material: Polycarbonate lenses, PC temple frames
- Anti-UV, anti-scratch, unbreakable lenses
- Coated with an anti-steam film to help keep the glasses from fogging up when breathing or in the rain
- Glasses meet TCVN standards tested by center III, US ANSI standards, European CE standards

91961M/Double Shield - Taiwan
- Plastic frames, lenses made of polycarbonate with UV protection, scratch resistance, and unbreakable.
- Meets TCVN tested by Center III, ANSI standards.

KT GB / Việt Nam
- Chất liệu: vải không dệt chống bụi sương, màn lọc ACF 100%
- 7 lớp: 2 lớp vải thoáng khí, 3 lớp vải lọc bụi, lớp than hoạt tính và lớp lót trong
- Sợi than hoạt tính dày 3mm gồm 7 lớp có miếng kẹp ở sóng mũi
- Lớp lọc bằng than hoạt tính ép trong vải không dệt ngăn ngừa được hầu hết sự thâm nhập vào đường hô hấp của các hạt bụi cực nhỏ và các chất thải ô nhiễm khác. Lọc các mùi hôi, hóa chất, mùi xăng xe và khói.
- Có chứng nhận tiêu chuẩn của trung tâm đo lường chất lượng 3 (Quatest 3)

High quality rainwear RB-2 RANDO*
- The pants and shirt set has 2 uses: Keep warm - protect from the rain
- 2-layer fabric design helps keep warm and protect against cold
- Fabric thickness: 0.22 mm
- Material: High quality 2-layer Nylon/PVC, non-stretch, non-wet, digital sewing technology, water pressure testing process of more than 4,000 AMPH/cm2
- Suitable for both men and women
- Size L (<1m60); XL (1m60–1m65); XXL (1m66–1m73); 3XL (>1m73)

1100 Silicone + 521 / Sorbent - Russia
- Uses: filtering organic toxic gas vapors (organic solvents, acetone, benzene...); inorganic (such as Cl2, H2S, HCN, HCl,...); SO2 and acid.
- Respiratory resistance: only 39.2 Pa, 2.5 times lower than the requirement of EN standard (100/39.2 Pa). This is an important indicator, especially when used in hard working conditions. Lighter breathing helps the wearer spend less effort and can maintain wearing the mask for a long time.
- Effective time of the filter cartridge: Test results with sample toxic gas vapors (with specified concentration, flow, temperature, humidity) are much longer than the requirements of EN 14387 standard - copper Meaning longer usage time:
+ Protection time with Hydrogen Cyanide reaches 50 minutes, 2.5 times longer (50/25 minutes)
+ The protective effect time with Sulfur dioxide reaches 70 minutes, 3.5 times longer (70/20 minutes),
+ The protective effect time with Chlorine reaches 50 minutes, 2.5 times longer (50/20 minutes)
+ The protective effect time with Hydrogen sulfide reaches 80 minutes, 2 times longer (80/40 minutes).

- The manufacturing material is Silicone so it is very soft and comfortable to wear
- Appropriate structure, fits the wearer's face. Does not affect eye vision. Does not affect the need to wear additional protective equipment such as hats, goggles, or face shields.
- The carrying strap has a high elastic feature, the length can be adjusted to fit. Easy and quick to put on and take off. Easy to clean when wiped or cleaned with water or detergent.
- Working temperature from −40 ° C to + 40 ° С.
- Meets EN 140:1998 + AC:1999 standards.

AVONO / PARADE - France
- Smooth, water-resistant material.
- Steel toe cap withstands forces up to 200J.
- Steel midsole provides puncture resistance.
- Slip-resistant outsole, SRC certified; Resistant to oils, grease, and various acids and alkalis.
- Shock absorption: equipped with shock-absorbing components under the insole.
- High-cut design protects the ankles, suitable for use on construction sites.
- Meets the latest CE standard EN ISO 20345:2022, ASTM F2413-18.